Build your own Flight Tracker in minutes—no coding, programming software, or Arduino IDE required. Simply connect your ESP32 to your computer, open the web flashing tool in your browser, and upload the firmware with a few clicks. It's the fastest and easiest way to get your Micro Radar Flight Tracker up and running, making it perfect for both beginners and experienced makers.
I'm using a 1.28" 240x240 pixels round display with GC9A01 driver.
2. 1.28" GC9A01 display
AliExpress➡️AliExpress link 1 AliExpress link 2
Circuit Diagram:
You must connect the display to the ESP32 following the circuit diagram otherwise the display won't work for this firmware.
Flash firmware:
I've made a web flashing tool for direct firmware upload using web browser (please use Chrome).
Note: Follow instructions before flashing firmware.
Setup guideline:
After uploading the firmware you need to setup the tracking location (latitude, longitude), api key etc.
- Follow Flashing guideline pdf for step-by-step process.
- Follow VScode guideline pdf for manual upload.
- Source code uploaded in drive link.
If you face any problems with the project, feel free to send me e-mail with a subject "micro radar round" to abid.business01@gmail.com
Comments
Post a Comment